Shop Gear

Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.

Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

Crank Brothers' Quattro 3-Hole Cleats are the perfect cleats to use with your 3-hole compatible road shoes and Crank Brothers pedals. They're made from solid brass for crisp entry and exit, and durability. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

- The ultimate flat handlebar mirror - Versatile and durable with a wide angle of adjustment that can be flipped down and out of the way - Installs in seconds, comes fully assembled

- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame - Perfect for street or dirt jump where simplicity and durability is key - Stainless steel arm mounts to derailleur hanger and dropout - Loosen bolt and swing down and back to adjust chain tension - High density polyurethane pulley with sealed cartridge bearings

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

The mounting solution for Thru Bolt rear wheels. Designed for an axle diameter of 10mm in the rear, the thru bolt system is a special kind of axle mounting for bikes. The DT Swiss thru bolt system is compatible with standard quick-release dropouts, but requires matching hubs. The stronger wheel connection results in greater stiffness. - Overall Length: 152mm - Thread Pitch: M10 x 1.0mm - Flat Washer

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Extra security against theft - 5mm hex CrMo axle

- Secure clamp fits any seat post size (24-32mm diameter) - Quick-release seatpost attachment - Reflector bracket included - Rubber grippers keep loads in place - Weighs 520 grams - Recommended cargo limit: 20lbs - 19.5" from attachment point to end of rack, platform 4.5" wide, 12.5" long Note: Not for use with carbon fiber seatposts

- Holds one or two bikes - Clears space in basement/garage - Holds any wheel size securely - Rubberized feet protect floors - Maximum tire width: 2.25 inches - Dimensions: 22" x 9" x 14"

Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g

A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Free up valuable handlebar space with the Headset Spacer Bell. - For 1 1/8-inch steerers

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension Swept-back riser bars. For comfort or casual riding in a more upright position with less reach. - Comfort oriented bar - Not intended for DH riding - Bar Clamp Diameter: 25.4mm - Lever Compatability: Mountain 22.2 - Material: Aluminum

Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 140 - Steerer Type: Straight - Weight: 877g - Wheel Size: 26-inch

At only 125 grams (610mm), Easton's EC70 Flat Handlebar is a must-have for every tight, light, and fast cross-country rig. It's no-rise style puts you in a low, aggressive position, something that racers and 29er riders love. It's carbon construction has been honed and refined from two decades of carbon experience for a high-end, super-smooth ride.

The EC90 SL crank arms utilize the RaceFace CINCH technology which allows for direct mount 1x rings as well as direct mount 2x spiders, providing industry-leading versatility and peloton-leading performance. - Hollow carbon construction paired with highest grade aluminum pedal insert and spindle - Bottom Bracket sold separately - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - CINCH interface with road specific 30mm spindle - Road standard Q-Factor of 149mm; will fit every major road BB standard - Weight: 352g

Easton's Haven Low-Rise aluminum handlebar is an easy answer for your all-mountain rig. Incredibly light (just 285 grams!), it measures 740 millimeters wide, the ideal width for squeezing between trees on your next trail session. TaperWall tech lets Easton reduce material and weight without sacrificing strength or durability. Easton's Haven: it's about rolling faster and flying farther.

Nestled in the Scottish Highlands, it's no wonder Endura produces some of the toughest, most innovative cycling clothes. Their Hummvee Shorts are crafted from durable Teflon-coated nylon fabric for shorts that laugh at rain and scoff at rough trails and roads. For a perfect fit, the Hummvees boast an adjustable belted waist and stretch lower back and inner leg panels. There are also ample pockets to haul your gear and zipped ventilation to keep you comfy, no matter the temperature. Plus, the included 6-panel Clickfast liner short provides all-day comfort and support.

Endura's Trekkit Shorts are ready to join you on all your cycling adventures. Their breathable 4-way stretch fabric is durable and features a seamless gusset panel and an elastic waistband with a drawcord and mock fly front. The mesh liner is lightweight and quickly transfers moisture, while the 300 series chamois keeps you comfortable throughout your ride. Two hand pockets and a rear zip pocket lend versatility to these baggies, so you can wear them post-ride too.

- Enduro series with dual-compound surfaces, softest in the palm rest - Inboard aluminum clamp with cutouts in grip core for added comfort - Updated rubber compound for greater shock absorption and steering control - Choose either standard or slim diameter