Other
$22.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$25.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$10.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$38.00
Chrome housing end caps are durable and shiny.
- Bottle of 100
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame
- Perfect for street or dirt jump where simplicity and durability is key
- Stainless steel arm mounts to derailleur hanger and dropout
- Loosen bolt and swing down and back to adjust chain tension
- High density polyurethane pulley with sealed cartridge bearings
$19.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
$94.80
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles
$129.60
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss EXP 54 Tooth Upgrade Kit
$149.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 54T
$34.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$37.95
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$20.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$75.00
36 Air Shaft Assembly for Fox suspension forks.
$30.99
Features
- E-Bike specific kickstand
- Designed to handle the additional weight of battery assisted Giant bicycles
- Adjustable leg assures the perfect fit for all frame sizes
Fits:
- Road-E
- Quick-E
- Dirt-E
- ToughRoad GX-E
- Explore-E
- Vall-E
- Amiti-E
$35.00
Seatpost lever and cable set for Giant's Contact Switch Seatpost
$63.00
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
$63.00
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
$3.00
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables.
- Fits all Greenfield kickstands and most generics
- Made in the USA
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains
- DLC Coated
- Non-reusable
- Opening Tool Required
- Card of 2 pairs
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm
$1.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$2.00 - $2.75
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Page 1 of 6
Next page