Bike Gear

- Wide alternating rectangular knobs with deep channels between them offer a fast rolling, robust tire suitable for pavement and off-road - Interior lug siping improves traction and water evacuating characteristics - E50 - are rated for use with E-Bikes up to 50kph (31mph) and conform to EU ECE-R75 standard. Also are designed for more demanding terrains and off-road adventures

This front rack is specifically designed for Aventon's Aventure and Aventure 2 fat tire ebikes. Get additional cargo space with this wide front rack that can easily hold a small cooler with drinks or a small picnic setup. With simple installation, you can unlock new possibilities with more cargo space for your Aventure ebike. Features: - For Aventon Aventure and Aventure 2 Ebike - Load Capacity: 20lbs - Black Matte Finish or Green Finish

Rear Rack Set - Pace 4

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each

- Melt forged aluminum construction - Coiled spring tension adjust

- Melt forged aluminum construction - Coiled spring tension adjust

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon

The Bee enables family bike adventures on a budget without sacrificing safety and durability. This lightweight, bike-only trailer features comfortable seating for one or two children, tinted windows and plenty of space for cargo. Share your love for the outdoors with your little ones in the Burley Bee. - Compact fold flattens the trailer for easy storage and transportation - 20” push button wheels for quick removal - Tinted side windows

The Burley Bee, our original bike trailer, is a long-standing family favorite for biking with children. With UV-protected windows, front and rear reflectors, and a 5-point harness system, the Bee takes both safety and comfort seriously.

- RR-S AR Compound offers outstanding grip on both rough roads as well as pavement in all weather without compromising on speed - Single-layer SRC casing delivers an incredibly supple ride with superior rolling efficiency at a super low weight - Race Shield puncture protection provides superior puncture protection without compromising speed or road feel - Carbon/Kevlar Composite bead keeps the tire secured to the rim and provides greater strength to withstand the higher pressures needed for road tires

The CST Decade was designed for flatland BMX riding. - Smooth tread profile with no knobs to interfere with your feet while performing tricks

Push the standards of all-mountain freeride tires with the beefed up BFT. The (Big Fat Tire) has it where it counts – meaty center and side knobs to dig in on tight turns and tough climbs. - Designed for trail and freeride use - Durable 27 TPI casing

If you're looking for a high-volume tire with low rolling resistance then look no further than the Fringe. The Fringe has a grouping of tightly spaced ramped knobs that for low rolling resistance with a side and mid knob that will inspire cornering.

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

CST C1779 Tires. The CST Metropolitan Palm Bay tire features a unique tread that will keep your ride both smooth and stylish. - Perfect for everyday city riding - APL Puncture-resistance features .7mm layer of rubber between tread and casing - Tread pattern designed for reduced rolling resistance with consistent traction - Reflective sidewall for added safety - 22 TPI casing

The Tourance is made for e-bike owners who desire the ultimate tire for comfortable urban riding - Designed for urban touring and commuters - Directional tread pattern provides excellent traction while maintaining rolling speed - Lightweight 60 TPI construction increases efficiency and protects against punctures - Dual compound, wire bead

The Toboggan is an oversized studded tire, suited for the most extreme conditions. - Studdable-ready

Price point 11 Speed chain has a wider link design for increased shifting performance and reduced noise, and slotted links for reduced weight. - Designed specifically for use with Campagnolo 11 speed drivetrains only

Campagnolo's Chorus Cassette offers precise, fluid shifting for your 11-speed drivetrain. The teeth have been exquisitely engineered and machined from steel, then coated with a nickel-chrome surface treatment and mounted on an aluminum carrier for flawless shifts and excellent durability.

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

More comfort, more control. Lightweight EVA foam and cork combine with a contemporary knurled texture twist – offering a stylish, comfortable, and durable finish to your bike. Where it thrives: The open road, gravel roads What it's built for: Grip, durability Highlights: - Comfortable, lightweight EVA foam absorbs road-buzz and feels great - Natural cork elements and debossed knurled pattern for better grip in all conditions / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 82g

Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security

More comfort, more control. Advanced three-part construction is used to create a supple, durable tape with excellent vibration damping properties and a tacky all-weather finish. Where it thrives: The open road, up and down hills What it's built for: Comfort, control Highlights: - Lightweight EVA foam with a QuellGel silicone gel-layer provides an effective barrier against road-buzz for extra comfort - Thin polyurethane upper and knurled pattern provide grip in all weather / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 3mm, length: 200cm, weight: 112g