Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Electronics

Wahoo Fitness RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Sigma CR 2032 Battery
$3.50
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
SRAM RED AXS Power Meter Spider
$599.00
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
Quarq ShockWiz Spares - Cap and Mounting Boot
$35.00
Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.
MSW Miniac Wireless Bike Computer (CC-200)
$39.99
MSW Miniac Wireless computers are designed to be installed quickly and give the essential information riders need to best enjoy their trip. - Ten functions: clock, current speed, average speed, current vs average speed comparison, maximum speed, trip time, trip distance, total odometer, auto scan, calories - Two-button design - CR2032 battery included
K-Edge Adjustable Garmin Stem Mount
$39.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
K-Edge Replacement Garmin Insert Kit
$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Garmin Bike Mount Varia Universal Out-Front (Dual)
$39.99
Stay ahead of the pack with this out-front mount that lets you add your bike headlight (sold separately) to a second bike or attach a compatible Edge (sold separately) to control the light while riding. The mount gives you easier, heads-up positioning for easier monitoring and safety. Includes mount and 2 shims.
Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
$69.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Garmin Cadence Sensor 2
$39.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Garmin Edge 830 Sensor Bundle
$499.99
Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Cycling safety features include new bike alarm, group messaging and tracking, assistance and compatibility with Varia rearview radar and lights so you can see and be seen - includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; integrated Trailforks data includes trail difficulty ratings - Customize with free apps widgets and data fields from the Connect iQ Store - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode - Speed sensor, Cadence sensor and Heart rate monitor Who cares that the Edge 830 touchscreen cycling computer puts trail maps and ratings at your fingertips and offers insights to help you improve? You do. So, whether you’re an enduro extremist, a black diamond expert or somewhere in between, Edge 830 is ready to tame the trails with you. In The Box - Edge 830 - Flush out-front mount - Standard mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation
Garmin Out-front Bike Mount
$40.00
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).
Garmin Varia Seat-Post Quarter Turn Mount
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
Delta X Mount Pro
$36.99
Instant bike dashboard With a sleek, low profile, Delta's X-Mount Pro universally adapts to all phones. Updated models include mounting suited for your Garmin and Wahoo systems, when your smartphone just isn't enough. An all-in-one solution with a single mount, each of your screens stay visible and secure, so navigation and your favorite apps are always within reach. Features Secure - Composite construction securely holds your phone Compatibility - Silicone stretch web material secures any phone with any case Universal - Updated models include mounting suited for your Garmin and Wahoo systems. An all-in-one solution within a single mount, each of your screens stay visible and secure. Construction - Aluminum with silicone stretch web. Aesthetic design offers riders a low-profile mount Quick Assembly - Mount drops under stem cap Weight - 0.11 lbs / 50 grams
CatEye Padrone Plus Bike Computer
$59.95
The Padrone Plus features a large display with a backlight, making it easy to see in all cycling conditions, day or night.
CatEye Universal Wheel Magnet
$5.00
Wheel magnet for all CatEye cycle computers
Bosch Purion Display w/Integrated Control Unit
$125.00
The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance
CatEye RD300W Speed Sensor
$25.00
This Sensor works with the Strada Wireless RD300, Strada Wireless Universal CC-RD310W, Micro Wireless CC-MC200W, Urban Wireless CC-VT240W, and Urban Wireless + CC-VT245W.
Topeak RideCase w/Mount (iPhone 6 and 6 Plus)
Topeak's RideCase and mount lets you use your iPhone 6 or 6 Plus as a cycling computer, as a GPS navigating device, to listen to music, and so much more while you're cruising the open road. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. An integrated flipstand allows comfortable viewing in landscape or portrait orientation when you're off the bike. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds.
Sigma Mounting Bracket Rox 1909/2209 (2450)
Replacement handlebar/stem mount for wireless CR 2450 computers. Compatible devices: ROX 8.0 ROX 9.0 ROX 8.1 Rox 9.1 BC1909HR BC2209MHR ROX 5.0 ROX 6.0
Rokform Bike Handlebar Mount Kit
With the Rokform Bike Handlebar Mount Kit, your phone is safe and secure thanks to its easy to use locking design that allows you to take your phone on and off in seconds. With the industry’s only lever lock and adjustable security strap you can be rest assured your phone is safe. The simple adjustable strap design installs in seconds and can be removed and transferred to other handlebars with ease. The Rokform Bike Handlebar Mount is even universal enough to work great on shopping carts, bikes, golf carts and more! Rokform Handlebar Mount Kit Includes: Bike Handlebar Mount Rugged Case Removable hi-tensile wrist lanyard
Profile Design UCM Universal Computer Mount 25mm
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM XL Universal Computer Mount 60mm
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
MSW Speed Sensor Magnet
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
K-Edge GO BIG GoPro Top Cap
NEW K-EDGE Go Pro Style Top Cap is an ideal position for your camera or light. This mount replaces your top cap with a functional camera/light mount. Not all of these Top Cap mounts are created equal. The precision fit of the K-EDGE Mount is critical to both proper headset compression AND camera security. Whether dropping into a World Cup Downhill descent or simply following your kids on a family ride, enjoy the convenience of this GoPro style mount. - Clean, sleek, (replaces top cap) - Ideal position, centered, above cockpit - Ultimate Enduro, DH, filming platform - Adaptable camera or light mount - CNC Machined, one piece, lifetime warranty - All hardware included
K-Edge Go Big GoPro Adapter
The K-EDGE GO BIG Adapter Mount is a universal mount designed to lock your GoPro camera, or other GoPro interface compatible accessories, securely to whatever you’d like. This is the same secure GoPro attachment system that our handlebar and saddle rail mounts use. - CNC Machined 6061 T6 Aluminum - Low profile design minimizes camera shake and mounts low and stable for best sports performance - Compatibility – Hole spacing 1”, countersunk for M4 flat head socket screw, M5 bolt for camera attachment included, works with any and all GoPro HERO series, GoPro sessions series Cameras. Shimano CM-1000 and Garmin VIRB X Compatible when using the adapter supplied with the VIRB - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Replacement Wahoo Insert Kit
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Garmin ANT+ USB Stick
Garmin's ANT+ USB stick plugs into your computer's USB port to wirelessly transmit your activities to Garmin Connect and Garmin's Training Center. It automatically receives your activity data when your compatible ANT+ Garmin device is within range.
Garmin Bike Cadence Sensor
Monitor your pedaling cadence as you ride with Garmin's easy-to-install wireless sensor. The cadence sensor fastens to any crank arm size and measures pedal strokes per minute so you can get the most out of your training. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain, and move between bikes.
Page 1 of 2 Next page